1. Connect receiver to motor as displayed in fig. 1 (1 connects to 1, 2 to 2 etc.)(Click image to enlarge)
      Please note: Spade connectors may not line up to motor connections. In this case, apply a short length of wire between each connection by taking the cover off the receiver and wiring from each screw terminal to the necessary terminals on the motor.
    2. On the new receiver, push the small button inside the larger green button once.
    3. Press the button on the new remote you wish to use. (fig 3)
    4. Repeat steps 2 and 3 for all other merlin remotes